en
    Supra generations

    Kaufe und verkaufe gebrauchte oder neue Teile kostenlos auf SUPRA.PARTS

    Supra generations

    The Toyota Supra Community for all Supra generations

    Toyota Supra A90

    Owners of the fifth generation Toyota Supra are thrilled about that car

    Toyota Supra MKIV

    In July 1993, the fourth and so far last generation of the Supra came on the market. Internationally, this type is called " Supra MKIV ".

    Toyota Supra MKIII

    In early 1986, the third generation of the Supra was introduced. It is also the first that has not been marketed with the suffix Celica.

    Celica Supra (MK2)

    The second generation was presented in the fall of 1981 and had a completely independent drive with the new (170 hp) 6-cylinder engines.

    2000GT & Supra MK1

    The first Supra built from spring 1978 to summer 1981 was still offered as a top version of the Celica first in Japan and later in the United States.

    paar tips zu zusatzinstrumenten | Forum

    Topic location: Forum home » Supra MK4 » Technik
    Spoony
    ich wollte mir jetzt ein paar instrumente kaufen, vielleicht hat der ein oder andere noch sachdienliche verbesserungsvorschläge.

    geplant sind:

    boost controller, apexi avc-r
    aem wideband gauge
    2 öltemp von hp raid, einmal motor und einmal getriebe (automatik)
    öldruck von hp raid
    abgastemp. von sard

    der boostcontroller und die wideband von aem sind schon sicher, nur bin ich mir im unklaren über die anderen anzeigen. die hp raid sind sehr günstig und reichen mir für die öle und den druck. selbst wenn die minimal ungenau sind, bei den werten kommts mir nicht auf 0,1 bar oder 3 grad an.

    die abgastemp von sard ist leider 60mm im durchmesser, aber die in deutschland angebotenen sind mir zu ungenau von der anzeige, lieber wären mir hier auch 52mm.

    wo kann man das ganze platzieren? in der a säule hab ich nur halter für 2x60mm gesehen für den rechtslenker

    ich möchte das ganze dezent gestalten und werde auch das dashboard umbauen da wird dann rausgeschnitten und zugespachtelt damit es nicht zu gebastelt aussieht. wollte das teil eh neu lackieren lassen und könnte dann gleich umgestalten für die anzeigen
    Oxwall Community Software