Kaufe und verkaufe gebrauchte oder neue Teile kostenlos auf SUPRA.PARTS

The Toyota Supra Community for all Supra generations

Owners of the fifth generation Toyota Supra are thrilled about that car

In July 1993, the fourth and so far last generation of the Supra came on the market. Internationally, this type is called " Supra MKIV ".

In early 1986, the third generation of the Supra was introduced. It is also the first that has not been marketed with the suffix Celica.

The second generation was presented in the fall of 1981 and had a completely independent drive with the new (170 hp) 6-cylinder engines.

The first Supra built from spring 1978 to summer 1981 was still offered as a top version of the Celica first in Japan and later in the United States.

Engine mechanical (2JZ-GTE) - Preparation - Toyota Supra A80

SST (Special service tools)

09201-10000	Valve Guide Bushing Remover & Replacer Set
09201-01060	Valve Guide Bushing Remover & Replacer 6
09202-70020	Valve Spring Compressor
(09202-00010)	Attachment
09213-70010	Crankshaft Pulley Holding Tool
09222-30010	Connecting Rod Bushing Remover & Replacer
09223-15030	Oil Seal & Bearing Replacer	Crankshaft rear oil seal
09248-55040	Valve Clearance Adjust Tool Set
(09248-05410)	Valve Lifter Press
(09248-05420)	Valve Lifter Stopper
09301-00110	Clutch Guide Tool	2JZ-GE M/T
09316-60011	Transmission & Transfer Bearing Replacer
(09316-00011)	Replacer Pipe	Crankshaft front oil seal Camshaft oil seal
(09316-00051)	Replacer “D”	Camshaft oil seal
09330-00021	Companion Flange Holding Tool	Crankshaft pulley
09816-30010	Oil Pressure Switch Socket	Knock sensor Oil pressure switch
09843-18020	Diagnosis Check Wire
09950-50010	Puller C Set
(09951-05010)	Hanger 150	Crankshaft pulley Crankshaft timing pulley
(09952-05010)	Slide Arm	Crankshaft pulley Crankshaft timing pulley
(09953-05010)	Center Bolt 100	Crankshaft pulley Crankshaft timing pulley
(09953-05020)	Center Bolt 150	Crankshaft pulley Crankshaft timing pulley
(09954-05010)	Claw No.1	Crankshaft timing pulley
(09954-05030)	Claw No.3	Camshaft pulley
09950-70010	Handle Set
(09951-07100)	Handle 100	Crankshaft rear oil seal Valve guide bushing
09960-10010	Variable Pin Wrench Set
(09962-01000)	Variable Pin Wrench Arm Assy	Camshaft timing pulley
(09963-01000)	Pin 10	Camshaft timing pulley

08826-00080	Seal Packing Black or equivalent (FIPG)	No.1 camshaft bearing cap Cylinder head Rear oil seal retainer
08833-00070	Adhesive 1324, THREE BOND 1324 or equivalent	Drive plate bolt (A/T) Union for oil cooler hose (2JZ-GTE)
08833-00080	Adhesive 1344 THREE BOND 1344 LOCTITE 242 or equivalent	Idler pulley pivot bolt Oil pressure switch

This guide is based on the book edition Toyota (RM502U, 1997)